Plug Fan Heat Recovery Units (Aluminum Heat Exchanger)

Technical Drawing 3D Data

Fanex

It is manufactured as standard between 500 m³/h and 4,000 m³/h. The outer casing is made of galvanized sheet metal and contains 2 G4 dust filters, 2 plug fans, 1 aluminum plate heat exchanger, and 4 intake and exhaust ports. The filters are on a sliding system. Due to the practicality of our production process, the heat exchanger, plug fans, and filters can be easily removed and installed. The heat recovery unit takes in air, filters it, and returns it to the interior. It takes in fresh air from outside, filters it, heats it, and returns it to the interior. It is used with a heater and control panel.

MODEL	FAN MODEL	VOLTAGE (VOLT/HZ)	MOTOR POWER (WATT)	CURRENT (A)	RPM (d/d)	FLOW RATE (m3/h)	PRESSURE (Pa)	SOUND (dBa)
MODEL	FAN MODEL	VOLTAGE (VOLT/HZ)	MOTOR POWER (WATT)	CURRENT (A)	RPM (d/d)	FLOW RATE (m3/h)	PRESSURE (Pa)	SOUND (dBa)
FIGK-P-250	220	230/50	2x105	2x0,44	2700	250	150	60
FIGK-P-500	250	230/50	2x145	2x1,14	2650	500	150	60
FIGK-P-750	280-02	230/50	2x420	2x1,45	2750	750	150	63
FIGK-P-1000	315	230/50	2x135	2x0,60	1400	1000	150	63
FIGK-P-1500	355	230/50	2x240	2x1,1	1400	1500	150	56
FIGK-P-2000	400	230/50	2x510	2x2,35	1400	2000	150	60
FIGK-P-2500	400	230/50	2x510	2x2,35	1400	2500	150	60
FIGK-P-3000	450	230/50	2x510	2x2,35	1400	3000	150	58
FIGK-P-3500	450	230/50	2x510	2x2,35	1400	3500	150	58
FIGK-P-4000	450	230/50	2x510	2x2,35	1400	4000	150	65
FIGK-P-4500	450	230/50	2x510	2x2,35	1400	4500	150	65